You are here: Welcome

 

 

DeltaV Virtual IO Module Network Gateway

The Virtual IO Module Network Gateway provides a native DeltaV IO Interface to Industrial Ethernet networks. DeltaV Controllers can read and write signals from plant floor and subsea devices that use these Industrial Ethernet networks such as PLCs, motor control centers, and weigh scales.

This manual is designed to help one configure a Virtual IO Module using VIMNet Explorer. The VIMNet Explorer supports configuration for all VIM types. The reader should be familiar with basic networking and DeltaV configuration. A basic knowledge of the communication protocol would be helpful while reading this document.

For an introduction on how to get started with the Virtual IO Module, see the Getting Started With VIMNet Explorer.

Copyright © 2015 MYNAH Technologies.